Gene Taylor’s Gunnison offers the best ski and snowboard equipment rental at the most affordable prices in Gunnison, County. We will always give the best overall rate on ski equipment that has all the latest shape technology and performance. With over thirty-five years renting ski equipment, Gene Taylor’s highly knowledgeable staff will expertly equip you and make sure you have the best on-snow experience possible.
We carry many top named brands such as Rossignol, Columbia, Salomon, North Face, Smith, Dalbello, K2, Marker, Sorel and much more.
Snow Sports Department Services
A full tune consists of filling any minor imperfections with either black or clear p-tex to match your equipment. It also includes an iron wax for the current conditions. An iron wax to get deeper into the pores, so it lasts longer vs. a regular sharpen and wax. Your fill tune also includes re-sharpening of the edges as well as a light base grind to smooth out the base.
A sharpen and iron was is recommended if there are imperfections that you don’t want to be fixed or if there are no imperfections. We will re-sharpen your edges as well as put a fresh coat of wax to match the current conditions.
An iron wax is best if you have no imperfections or don’t want them fixed and your edges are still sharp. We will put a fresh coat of wax to match the conditions. (Best if you just had a full or minor tune and conditions changed or you are going to a new area.)
A mount is for brand new skis that have never been drilled for bindings before. We also need at least one boot to do the mount.
A re-mount is if you bought used skis and we need to move the bindings to fit your boots or if you are getting new bindings for your skis. We take the bindings off, fill the old holes, and re-mount the current or new bindings in the correct spot. We need at least one boot to do a re-mount.
A binding adjustment is only needed if the bindings will adjust small or big enough to fit your boot. If not it will require a re-mount. If you are not sure one of the technicians will be able to determine which one will be best.
A base weld is necessary if an imperfection has gone all the way down to the base. We will clean and cut around the area so the new base material will be able to get a good hold on the base.
$8.00 (per weld)
If one or more of your screws has pulled out we will redrill the hole and put a hecoil in the hole for the screw to be able to grab.
$8.00 (per hole)
A sharpen and belt wax is more affordable and best if you are not able to leave your equipment for the day. A belt wax is much faster than an iron wax but does not last as long since it does not saturate into the pores as well. We will also sharpen your edges.